In order to achieve work without "consumables", we have customized and improved Google Gemini versions 2.5 Pro and 2.5 Flash so that their quality when writing articles reaches, and sometimes even was superior to GPT-5. Both of these versions are completely free, without any permanent restrictions and the need to top up the balance.

All you need to do to make them work is run ClipAISelect one of the above models (we recommend Gemini-2.5-Flash) in the "Parameters" tab of the input settings. The field for entering the API key can be left blank.

Need other neural networks? ClipAI supports completely free work with them as well (including with GPT). You will only need to register an account once, completely free of charge in the corresponding service. Read more - ­here.

Сообщение Нужно ли дополнительно оплачивать что-либо для работы ClipAI? появились сначала на ClipAI.

2. Then enable saving to HTML.

3. Once the article is generated, right-click on the resulting HTML file -> “Open with” -> “Microsoft Word” (or any other text editor of your choice).

Done! You can now save your document in .doc or .docx format (a standard Microsoft Word file) if needed.

Сообщение Как сохранить статью с картинками в документ Word (doc/docx)? появились сначала на ClipAI.

HTML files will now be saved in the same folder as txt files (specified in the Output Data tab). And if image generation is also enabled in the same "Publish" tabthen a separate folder with HTML file and images will be created for each article.

Сообщение Как сохранить статью с картинками в HTML-файл? появились сначала на ClipAI.

Next, we will describe how and in what ways we differ from other similar programs:

1. Text quality. 

If you believe that AI (eg ChatGPT) written text can be used only on doorways, and in other cases it is worth at least manually editing each article - you should definitely try ClipAI. We don’t just edit prompts, but create special systems for pre- and post-processing of text and queries: the program implements several hundred different sets of rules. This means that you will not encounter “nonsense text”, and for this you do not need to configure anything additional.

2. Internet connectivity for AI.

At the moment, ClipAI is practically the only program that allows connect neural network knowledge to the Internet. And according to our research, the best on the quality of implementation of this functionality.

Why is this necessary? To write text of maximum quality, even on the rarest topics. This will allow you to open new niches for earning money: for example, now you can generate high-quality text on medical, legal, or IT topics. Even if some information appeared only an hour ago, our program will be able to write an article on this topic! You can learn more about this functionality ­here.

3. Speed of work.

We immediately solved two problems of content generators based on neural networks: demanding PC power and low operating speed. Thanks to this, the speed of ClipAI on the average PC is higher at least 6 timesthan competitors! Moreover, our program will work perfectly even on the oldest computers, including in multi-threaded mode (minimum system requirements - 2 processor cores and 2GB of RAM).

4. Easy to set up.

Everything is done so that you can start working immediately after purchase. You don't need to come up with prompts, proofread the text, look for an API key and pay for its use, and so on: everything is already working. And even if any question arises, we have a convenient FAQ with an answer to almost anything. Didn't find the answer? No problem: simple write to us, and we will help you, right up to full customization to suit your needs via remote access.

5. No sanctions from search engines or similar problems.

Yes, search engines already reported a long time agothat sites are not pessimistic in ranking for the generated content. But why do such sites still decline in search results, and Yandex even imposes filter "UC" (useless content) to such sites?

The answer is simple: because other programs often actually write useless content.

In ClipAI, everything has been done to avoid problems: for example, many text improvements that were described above. And it really works: approximately 98% our clients are neither pessimized nor removed from the search results.

6. Work in one click.

Tired of launching several program windows in order to work with different parameters at the same time? Don't want to start the day by manually uploading XML or CSV articles to each of your sites, adding and compressing images, manually filling out Yoast SEO fields, and writing comments to make the article more engaging?

Our software does everything fully automatically. One click and articles are generated and published on your site, without the need for additional actions or monitoring.

7. Support.

Our team is working 24/7, almost daily, to help you. We are not only ready to fully configure the program for you, including through remote access, as stated above. We are ready to help, for example, with setting up WordPress or another CMS to suit your needs.

And we're not just talking about technical support. We constantly update the software, adding new useful functionality. Something is missing? Write to us and we will add the functionality you need.

We consider the practice of testing updates on clients unacceptable. Therefore, the tester monitors the absence of errors and “bugs” in the template. For example, we will never ask you to test updates yourself, as is the case with some programs.

8. No additional costs.

It's simple: to work with ClipAI you need to pay only for him. You don't need API keys, accounts, browser fingerprints, etc.

This distinguishes ClipAI from other combines and content generators: for example, XGPTWriter or X-GPTWriter, GPTNET, Writesonic, AI Engine, X-Parser, Easy GPT Content, AI Auto Content, AI WP Writer, Smodin, and others. Here you can learn more about the functionality of the software. If you have any questions about the functionality, write to us on Telegram, or by clicking on the online chat button in the lower right corner.

Сообщение Чем ClipAI лучше конкурентов? появились сначала на ClipAI.

If you don't have Zennoposter, you can use up to 20 threads. If you have Zennoposter Pro, you can use an unlimited number of threads (for example, 500).

At the same time, ClipAI, unlike its competitors, works as efficiently as possible. It means that:

• Article within each thread generated as quickly as possible (about 5-10 minutes for competitors versus 2 minutes for ClipAI)
• Uses minimal PC resources (for example, to work with 20 threads, a PC with 2 processor cores and 2GB of RAM is quite enough).

It means that ClipAI's 20 threads are faster than competitors' 50 threads. At the same time, for example, in XGPTWriter, even to run 15 threads, you need a PC with a 6-core processor and 16GB of RAM. While ClipAI will be able to run ~200 threads on the same configuration.

In the end, taking all factors into account, on an average computer:

• ClipAI will write in an hour unlimited number of quality articles 10'000 characters each, if you have Zennoposter.
• ClipAI will write in an hour ~600 quality articles 10'000 characters each, if you don't have Zennoposter.
• XGPTWriter (or similar programs) will write in an hour ~100 articles 10'000 characters each.

Сообщение Какое максимальное количество потоков можно использовать в ClipAI? появились сначала на ClipAI.

1. Use a different AI. We have comparison table of different neural networks for writing articles. Moreover, within the same service, newer neurons often (but not always) write better articles than older ones.

2. Change text style. This will help diversify the text and make it look like it was written by a person. For example, the Google Gemini was found to write articles much better when using the First Person style.

3. Adjust the required text size. It is best to indicate it in symbols. Their number should be adequate for the topic you are describing: for example, if the topic of your article is “Review of the new iPhone,” then 10 thousand characters is the normal size; but if the topic is “Characteristics of the new iPhone” - no. If an article is too large, the AI may start adding logical repetitions, or even invent facts that don't exist.

4. Use a neural network connection to the Internet. For example, this can be done using ClipAI Plus ­ other services. This will help significantly improve the quality of the text: especially if you touch on a rarely known topic; or information about which has changed in recent years.

5. Check whether the article generation mode is correct. B ClipAI There are four main modes: auto detection (recommended); creating short articles; creating large articles with sections; creating large articles according to your plan. It is not recommended, for example, to write articles longer than 4 thousand characters in the short article mode (or directly in the same ChatGPT).

6. Check the “Priority on...” parameter in the "Options" tab input settings. If it is set to "Token Saving", try selecting "High Text Quality". This way you can reduce the number of logical repetitions in large articles.

7. Try changing the values in "Advanced options". Namely, in the “Text Variety” and “Text Spam” parameters.

Сообщение Как улучшить качество статей? появились сначала на ClipAI.

Please note: almost all services are free to use.

	GPT (OpenAI)	Google Gemini	Together AI	Deepseek	OpenRouter, per account with a limit (60 requests per minute); there are completely free models that do not spend the balance (labeled "Free"), There are many completely free models (labeled "Free").	Mistral	Nvidia Cloud	GROQ
Quality (English)	It's great	It's great	Good	Good	Good	Good	Good	Good
Quality (Russian language)	It's great	It's great	Good	Average	Good	Average	Good	Good
Free to use	Appears after selecting ­here "Enabled for all projects."	Unlimited free use, capped (more than 60 requests per minute and 14'950 per day total for multiple models, including Gemma) per account; or free $300 per Google Cloud account, but virtually no limits.	Got it полностью бесплатные models that do not spend the balance (labeled "Free"), but are available only after entering the card data (without debiting).	—	Присутствует множество полностью бесплатных models (labeled "Free"). Up to 50 free requests per day per account immediately after registration, or up to 1000 requests per day - if the account has ever been funded by $10.	Provided free 1 million tokens (~2500 articles) per month per account.	Provided free of charge up to 40 requests per minute to the account. The validity period of the API key is about 6 months.	Provided free of charge from 250 to 14400 requests per day on each of the model offered by the service.
Regions of operation (IP)	Except RF/RB	Except RF/RB. IP addresses are supported more than 210 countries. EU IPs may sometimes not be supported.

• The table shows the characteristics (quality, cost) of the highest quality model if the service provides several models.
• The "Quality" rows in the table reflect the subjective opinion of the ClipAI team, based in part on user opinion.
• “RF” - Russia, “RB” - Belarus, “EU” - European Union.
• The "Work regions" line reflects from which IP addresses of which countries the request for article generation can be sent. Additional restrictions may also be imposed on the part of the service used, for example, in the usage rules.

This article contains information relevant to 07.10.2025. We update it as necessary (if any changes occur in the world of AI). Most likely, everything described above is still relevant today. At the same time ClipAI updated constantly.

Сообщение Какой ИИ выбрать для написания статей? появились сначала на ClipAI.

To begin with, we recommend checking the correct operation of the service through which you check uniqueness by comparing the highlighted “borrowings” with the found sources. For example, most often we receive complaints about the results of checks by the ETXT service: although it searches for similar elements very well, it does it too carefully. This means that he may consider another text, remotely similar to the one being compared, to be a direct borrowing.

1. Try to specify a narrower topic.

For example, if the topic of your article is “How to choose a laptop,” divide it into several different articles with a narrower topic. For example, “The best budget laptop for a student.”

ClipAI can divide topics into narrower ones using the “Creating ideas for articles«.

2. Use AI Internet Connection (for example, using ClipAI Plus).

Often, low uniqueness occurs because the topic used is too little known, and the AI knows little different information about it. In this case, you can use ClipAI Plus. This will help the AI learn much more information on almost any topic. Moreover, the facts in the text written in this way will be relevant today.

3. Increase the "Variety of text" in the "Parameters" tab of the input settings.

This will enable artificial intelligence to use more different facts in the article.

4. Use text style.

In this way, you can not only increase the uniqueness of the article, but also make it more "lively", more similar "to the eye" to a human-written one. It is recommended to use informal styles whenever possible.

5. None of the above helped? Do automatic rewriting received article.

Using rewriting in ClipAI, you can almost guarantee increasing the uniqueness of the text to 100%. We recommend starting with choosing a medium text uniqueness.

Сообщение Как повысить уникальность сгенерированной статьи? появились сначала на ClipAI.

Writing an article (better quality for short articles) — The simplest mode of writing articles. You need to indicate only the title of the article, without any instructions. ClipAI will send the AI the title of the article with all the instructions. If there are not enough characters, an improved analogue of the “Continue” request is sent. Best suited for short articles: In long articles, using this mode can have a lot of logical repetition.

Writing an article (with sections, for large articles) - Improved way of writing articles. At the entrance, you still only need to indicate the title of the article. However, during the work (as opposed to writing short articles) ClipAI first generates an article outline and then immediately writes an article according to this outline. In this case, many parameters are set automatically, after careful analysis of the text. That is why for articles with more than ~2000-3000 characters it is recommended to use this mode rather than the previous one.

Writing an article according to our plan — the same as the 'Writing an article (with sections, for large articles)' mode, but the article will be written according to the plan that is specified at the input. It is necessary to write in the following format:

Title of the article
First element of the plan
Second element of the plan
(...)

In this case, the title of the article should not contain any HTML tags, and plan elements may contain h-tags. If you want to specify h-tags, they must be entered in the format:

Heading
Sub-heading
(...)

Rewrite — Changing a ready-made article at the input so that some of the words are replaced with synonyms. Depending on the selected degree of rewriting in the “Processing” tab, the approach changes: for example, with “High” text uniqueness, sentences can also be swapped (without loss of meaning).

Antidetect+Uniqueness — Increasing the uniqueness of already written text, as well as various improvements so that other services do not recognize the text as written using AI. Before using this mode, try generating an article with “Simplified antidetect” enabled in the “Processing” tab. Perhaps the result will suit you much better: a simplified antidetect does not distort the meaning of the text, does not change the article visually, and works much faster.

Generating the program code — Generating program source code according to specified conditions.

Generating reviews — Generating text for reviews or comments. At the input - an article that needs to be commented on, or a description of something that needs to be reviewed. Please note: if you need to write reviews on your WordPress site, you do not need this mode, but the “Write comments for article” option in the “Publish” tab.

Creating ideas for articles — Creating article titles, ideas for something, and so on. The input could be, for example, a keyword, a general idea, a year, etc.. Useful if you need to write hundreds of articles on some general topic, but slightly different topics.

Generating images — Creation of images. At the entrance, just indicate what should be depicted on them.

Translator — Very high quality translation from one language to another. The output language is indicated in the “Processing” tab. There is no need to specify the language at the input: the AI will determine it on its own.

Custom template — Indicate to the bot yourself (in the “Processing” -> “Text of your template” tab) what needs to be done with the specified text. For example, if you specify the names of hundreds of books in the “Input Data” tab, and in the “Processing” tab you enter “Write a review of a book specified by the user,” a review will be written for each book in the input.

RAW mode — entering requests to the bot indicating the required algorithm of actions. For example, unlike the above mode, here you will need to enter “Write a review of a book with the title (...)” in each line.

Send a report to the developer — Use this mode if you have any problems while running the program. After launching in this mode, a report on the latest runs will be sent to the developer. If necessary, you can indicate your comment and attach the necessary files to the report.

Сообщение Краткая справка о режимах работы появились сначала на ClipAI.

Also, if the update was released several hours ago and you did not restart Zennoposter/Zennobox, you can update ClipAI without restarting. To do this, click on “Update available” in the line with the script.

If nothing helps and ClipAI is not updated, follow these steps:

1. Right-click on the line with ClipAI -> “Project Directory”.
2. Close Zennoposter/Zennobox.
3. In the folder that opens, delete the file with the “.xmlz” extension.
4. Open Zennoposter/Zennobox.

As soon as an update comes out, we write about it in our Telegram channel.

Сообщение Как обновить ClipAI до последней версии? появились сначала на ClipAI.

1. Search engines themselves reported that will not filter AI-generated content. However, they warned that like any other content, it should be useful and answer the user's request. To do this, pages are checked not only automatically, but also manually (for example, employees of the Yandex.Toloka service in the case of Yandex).

Useful and high-quality content is the main goal of ClipAI. A ClipAI Plus will make content even better by connecting AI to the Internet.

Just a statement from search engines is enough to understand: There will be no pessimization for AI content. The following points only explain why the PS's opinion on this matter will not change.

2. This check makes no sense. From search engines already There are ways to identify low-quality content: manual and automatic. If you start filtering AI content, only the following will be additionally filtered: high-quality content that responds to the user's request. Search engines definitely won’t do this.

3. Does not currently exist (and they are unlikely to ever exist) precision AI detectors. Even the most advanced ones quite often have false positives (in both directions).

For example, according to some verification services, “Crime and Punishment” was written not by Dostoevsky, but by AI:

According to another service (Originality.ai), this FAQ article was written by a neural network. As well as the legislation of Kazakhstan:

Zerogpt.com also believes that the legislation was written over 20 years ago by a neural network:

"Neuro Assistant Detector AI" from text.ru also has quite frequent false negatives, especially when checking text written in a formal style. At the same time, "100%" shows confidence in the result:

And according to others, ClipAI even in the very first versions, without ClipAI Plus writes like a man:

If you are still afraid of pessimization for AI-generated content, just turn on antidetect in the ClipAI settings. As stated on the page functionality, it will remove the most common AI detection methods, automatically diversifying the generated text.

Сообщение Разве поисковые системы не фильтруют сайты с сгенерированным контентом? появились сначала на ClipAI.

ClipAI works great on MacOS (including on Apple processors: for example, m1) when launched via Parallels Desktop. This is a program for working with Windows applications on MacOS. In this case, in Parallels you need to:

1. Go to settings

2. Select “Options” - “Sharing”:

3. Disable “Mirror Mac and Windows user folders”:

Also disable Coherence mode if it was enabled.

Сообщение Как запустить ClipAI на MacOS? появились сначала на ClipAI.

The ClipAI program itself works in Russian and English.

	Russian	English
Website		(~95%)
Instructions and knowledge base		(~95%)
ClipAI program
Autopay bot ClipAI	@clipai_en_bot	@clipai_en_bot
Telegram channel	@clipaibot

Сообщение Какие языки поддерживает ClipAI? появились сначала на ClipAI.

1. Multi-threaded mode

The most effective way to speed up. To use it:

1. In the "Input Data" tab, select the "(Multistream) take from file" mode.
2. At the bottom of the Zennoposter window, in the "Settings" tab, enter the number of threads in "Maximum threads" and in "How many to do" the number of lines in the file to be used for generation (you can enter more or click on the at the top of the Zennoposter window).

1 thread = 1 concurrently running copy of the program.

2. Changing the rewriting method

“Rewriting” (text synonymization) is the most labor-intensive and time-consuming way of working due to the nature of AI. In some situations, it is more appropriate not to rewrite the text, but to write a new one in the “Writing an article” mode. If this is not possible, try switching the rewriting uniqueness to “Medium” in the “Processing” tab - this should speed up the rewriting several times.

3. Reduce the amount of text generated

In the "Processing" tab, you can specify how many words or characters you need in the text. Perhaps you need smaller text? Then there will be much fewer requests, which means the text will be generated much faster.

4. Disable unnecessary options

Almost everything affects the speed of text creation, for example:

1. Language: Cyrillic text takes approximately 2 times longer to create than Latin text;
2. HTML markup usually speeds up generation a little on small text, but slows down on large text;
3. Creating images for text significantly slows down its publication;
4. In the “Parameters” tab of the input settings, with the “Priority on...” - “High text quality” parameter, articles are generated longer than when using “Token Saving”.
5. The mode of writing short articles (without subheadings) is much faster than the mode of writing articles according to plan. However, the short article mode can work much longer if you generate more than 4000 characters in it, while using the “Check for matches when continuing text” option in the “Processing” tab.

Сообщение Как ускорить работу программы? появились сначала на ClipAI.

Documents\ZennoLab\ZennoPoster\PurchasedProducts\ff8b8f31-36a9-4302-8998-81c72ef07196@zenno.club\GPT.zp

If you have Zennobox, click on the top of the window — — and then enter the path:

Documents\ZennoLab\ZennoBox\PurchasedProducts\ff8b8f31-36a9-4302-8998-81c72ef07196@zenno.club\GPT.zp

Set Execute Every to Once unless you need an execution schedule. You can then control the number of executions and start and stop the job from the Job Manager menu.

Please note: the “GPT.zp” file cannot be copied or moved!

Do not use different parameters in the “Stop” tab (if you suddenly changed something in it) at the bottom of the Zennoposter screen in different copies.

Сообщение Как использовать несколько копий программы на одном ПК с разными настройками? появились сначала на ClipAI.

1. If you have not previously owned Zennoposter or Zennobox, you don't need to buy anything extra! After purchasing ClipAI, you will be given a password for your personal account, as well as download link Zennobox. It is needed to run the program you purchased: the program itself will already be inside it, there is no need to download it additionally.
   If you have Zennobox, run the downloaded program and follow the simple installation process by clicking “Next”. Enter the e-mail and password given to you upon purchase.
2. After installation and launch, click on the line with ClipAI.
   
3. At the bottom of the window you can change some settings (for example, the number of executions, the maximum number of threads, and the schedule), but it is recommended to leave the “Log” tab open to display the work progress. At the bottom of the Zennoposter screen The “Proxy” parameter should always be in the “Do not use” position, even if you use it in input settings.
   
4. In the "How much to do" option at the bottom of the Zennoposter screen, you need to specify the number of lines in the file that you want to use for generation, if you are using multithreaded mode. In other cases, you must enter "1".
   In the “Maximum threads” parameter you enter the number of threads that the program will use to process tasks. For example, 1 thread corresponds to 1 simultaneously executed copy of the program, and one simultaneously generated article. How many threads are installed - articles are written so many times faster. If you are using multi-threaded mode − Necessarily in the input settings (point 4) -> “Input data” tab, set the mode “(Multi-thread)…”.
5. To start working for the first time, you need to open the ClipAI settings (right-click on the line with the script - “Settings”, or by clicking on the button ), and indicate the data you need for work:
6. In the “Home” tab, select the required operating mode, for example, “Writing an article.” It is recommended to use the sectioned writing mode: if you have an article of more than 2000 characters, you will get the highest quality content here.
   
   
   Detailed information about the various operating modes can be found both in this knowledge base and in the input settings, at the end of the "Home" tab.
7. In the “Input Data” tab of the settings, enter the required topics (one topic in each line, if “One line - one request” is set) or specify the file from which the topics will be taken.
   
8. In the “Processing” tab, specify the necessary parameters, such as the number of words or characters, HTML markup generation, etc.
   
9. Detailed information about some operating modes can be found in this knowledge base, and brief reference to practical to each parameter - directly in the settings by hovering the mouse cursor over "» to the left of the settings item you are interested in.
10. In the “Output Data” tab, specify where to save the received articles.
    
    By default, “{-Project.Directory-}” is installed here, but you can install any other one. And to go to the project directory, right-click on the line with the script -> “Project Directory”.
11. Click “Ok” and then the “Start” button (and “+1” if you did not enter the required number of executions in step 3) at the top of the Zennoposter window.
    

To stop the program before finishing writing the article, you need to right-click on the line with the script -> “Abort”. ClipAI updates automatically every time you launch Zennoposter or Zennobox.

ClipAI is constantly updated. Description of updates can be found in our Telegram channel. To download the update, simply close and then open Zennoposter or Zennobox: each time you open it, the latest version of ClipAI will automatically download.

Сообщение Первый запуск. Как запустить ClipAI, настроить его, и написать первые статьи? появились сначала на ClipAI.

ClipAI actually uses the Zennoposter framework to operate. However, you don't have to buy it: if you don't have Zennoposter, Zennobox is provided free of charge to get the job done. This is done fully automatically in our Telegram-bot.

Сообщение Мне нужно покупать Zennoposter, чтобы пользоваться ClipAI? появились сначала на ClipAI.