If you see a similar message here:

So you need to:

• Add support for at least the gd module in PHP on your server
• Or roll back to WordPress versions below 6.8 (not recommended).

If you are uploading an image in SVG format (not via ClipAI), you probably need to install the plugin Safe SVG.

Сообщение «The web server cannot generate responsive image sizes for this image» в WordPress. появились сначала на ClipAI.

In this case, you can use several copies of the program, in each of which set topics for articles of a certain category. But sometimes it is more convenient to indicate a category next to the title of each article. It is for this purpose, along with the parameters ancor ­ site, you can use the “cat” parameter. To do this you need:

1. Enable the use of categories in the “Publishing” tab of the input settings.

2. Enter categories next to the topic names in the format:

Article title;cat=Category (heading) name

For example:

Which company created ChatGPT?;cat=Neural networks What is the best way to fill articles on a website?;cat=Programs

Сообщение Как выбрать отдельные категории (рубрики) для разных статей? появились сначала на ClipAI.

1. Try enabling "Convert to WebP" in the "Processing" tab of the input settings.
2. Increase the “Timeout for waiting for a response to a request from AI” in the “Settings” tab.
3. Check whether access to your site is configured correctly in the “Publishing” tab.
4. Perhaps you do not have access to the neural network used to generate the image? If so, switch the image source used in the “Publish” tab.

Сообщение «Ошибка при генерации картинки, либо во время её публикации на ваш сервер. Продолжаем без картинок.» появились сначала на ClipAI.

1. Remember that you need to indicate the name of the category (heading), not its ID or URL.
2. The category must exist in a standard post type.
3. Try disabling the Litespeed Fix option in the Publish tab.

Сообщение «Указанная категория не найдена. Продолжаем без неё.» появились сначала на ClipAI.

Please note: this is not a ClipAI error. This is the response that your site returns via the REST API.

1. Most often, this error occurs due to incorrect entry of the application login or password. Check if you have configured your WordPress site correctly according to this instructions? Please note that you need to enter not your profile password from /wp-admin/, but the application password, which is exactly what is created in the above instructions. The login is your standard login from /wp-admin/.

2. This usually happens if you created an “application password” from an account that has lowered rights; or entered the username of this account in the “Publishing” tab. For example, he cannot create posts or publish them to all visitors. Check whether posts from this user are published manually through the admin panel (wp-admin). You can also check this by installing a separate plugin for managing roles and role access.

3. The error may be the result of some security plugin installed on your site. For example, it can prevent posts from being published via the WordPress REST API. Check the settings of such plugins and try disabling them.

4. Sometimes this happens if there is an article in the WP Post Recycle Bin with the same title or URL as the post attempt.

Сообщение «Извините, вам не разрешено создавать записи от лица этого пользователя.» появились сначала на ClipAI.

1. Install a file with access to WordPress sites in the “Publishing” tab:

Then each article will be sent to one of the sites specified in the file, one by one.

2. Do the same as in step 1, but also use the “;site=” parameter in the input file to indicate the specific site to which the article will be loaded. For example:

Buy kitchen tables;site=https://site-1.com/
Tabbouleh salad recipe;site=https://site-2.com/

By the way, you can also use other options.

3. Take advantage copies of ClipAI with different settings.

Сообщение Как публиковать разные статьи на разные сайты? появились сначала на ClipAI.

And then install (if they have not already been installed) the plugins: Yoast SEO and REST API Meta Support. The first plugin provides SEO optimization, and the second plugin provides setting values in the fields of the first plugin via the API.

If SEO optimization is not working for you - most likely, you either did not check the box above, or did not install any of the above plugins. To date, no further cases have been identified where this problem could occur.

Сообщение Как производить SEO-оптимизацию публикуемых на WordPress статей? появились сначала на ClipAI.

1. Open the .htaccess file using the built-in file manager on your hosting or via FTP, and add the line:

SetEnvIf Authorization "(.*)" HTTP_AUTHORIZATION=$1

If that doesn't help, try adding these lines:

RewriteEngine On RewriteCond %{HTTP:Authorization} ^(.*) RewriteRule .* - [E=REMOTE_USER:%{HTTP:Authorization}]

2. Check whether you can switch between Apache and Nginx on your hosting, and whether you can change the PHP version. Try changing these settings.

Сообщение «Ошибка 401» при публикации на WordPress появились сначала на ClipAI.

If it doesn't help - try the following. Open Zennoposter/Zennobox settings:

Go to the “Execution” tab and check the “Use an alternative method for transmitting HTTP requests” checkbox, and increase the “Number of HTTP request attempts” parameter, for example, to the value “5”.

If this doesn't help either — check if you are using any plugin (for example, for security) that blocks the WordPress REST API.

Also check what appears when you navigate to the browser at https://address-of-your.site/wp-json/ . There should be a JSON response (a lot of code). If there is a 404 error, or a redirect to the main page, most likely you disabled the “WordPress REST API” or “wp-json” in the security plugin or in the .htaccess file. It needs to be turned on.

Or, if you are using your own Apache server, enter the command “sudo a2enmod rewrite”.

Also, according to information from users, this error may be affected by the “Easy Table of Contents” plugin.

Сообщение При публикации на WordPress в логе «Пришёл пустой ответ от сайта на WordPress» или другая похожая ошибка; либо статьи не публикуются, но ошибок нет. появились сначала на ClipAI.

1. WordPress version no less than 5.6
2. The site protocol is https, not http. Even free certificates like LetsEncrypt are suitable. Usually installed with one click in the admin panel of your hosting.

Even if your site does not meet the above requirements, you can install basic-auth plugin to your site: after this, you can log in without the steps below, and you need to enter your WordPress account password as the password. But you shouldn’t do this without a reason: in any case, the lack of HTTPS will significantly lower your site in search results, and an old version of WordPress can add additional problems, including security-related ones.

Publishing in WordPress is configured in the “Publishing” tab of the settings:

We do everything as specified in the input settings. 

Website address - your website in the format:

protocol://domain.com/

Example:

https://google.com/

Exactly like that, with a protocol and a slash “/” at the end.

Login - your login from the administrator account on your site, with which you log into the admin panel. Sometimes this may be by email.

The password is GPT the password for the admin panel, and the application password. How to recognize him?

We go to the WordPress admin panel: usually it is located at the link https://your-site.com/wp-admin/. Select “Users” -> “Profile” on the left:

Scroll down a little further to this form:

We enter any application name (for example, “ClipAI”); there is no need to remember it: it will not be needed during setup. Click on the “Add a new application password” button. A form similar to this will appear:

This is the application password, which must be entered in the “Password” field.. You must enter exactly as indicated here: with spaces and case sensitive.

Сообщение Как настроить автоматическую публикацию на сайт с CMS WordPress? появились сначала на ClipAI.