In this article, let's break it down, How to connect local AIs to automatic writing of articles in ClipAI. Let's consider the work of ClipAI with the program "LM Studio". If you wish, you can use almost any other program: the instructions will be approximately the same.

Customizing LM Studio

1. Download LM Studio from the official website. This program is completely free of charge.

2. Go through the installation and the first launch of LM Studio. During the first launch you will be prompted to download the AI model:

Most likely, you will be offered one of the simplest models. However, we recommend downloading it: it will be easier to customize the operation first, and then change the model to the one you need.

3. Select the downloaded model to use by clicking on the top "Select a model to load"and then selecting the desired AI:

4. Click the "Developer" button on the left side of the LM Studio window and then click "Start server":

Customizing the ClipAI

1. Go to the input settings of the ClipAI (right-click on the line with the script -> "Settings"). Then click the Options tab.

2. Enter the "Secret key" - any key (e.g. "ClipAI"). Also select the model "GPT (own model)":

3. Under "ChatGPT" below, enter:

• "Own model" - name of the model in LM Studio. You can see it either at the top of the program window or in the chat responses with AI. Remember, there should be no spaces in the model name. For example, in this case you need to enter "deepseek-r1-distill-qwen-7b":

• "Custom API Endpoint" is the address specified on the "Developer" -> "Reachable at" page of LM Studio, to which you need to add "/v1/chat/completions". Most likely, you will have "http://127.0.0.1:1234" specified on this page, which means you need to specify "http://127.0.0.1:1234/v1/chat/completions" in the ClipAI settings:

As a result, the settings in the "ChatGPT" section of the ClipAI program should look something like this:

Installing AI models in LM Studio

To download and install the AI model, all you need to do is click the "Discover" button on the left side of the LM Studio window:

After that, a window will open to search for and install various neural networks. Usually, the more it "weighs" and the newer it is, the better the quality of the articles. But don't forget that the size of the neural network should not exceed the size of your VRAM (video card memory) or, in the case of using it on Mac computers with m processors (e.g. macbook on m1), your free RAM (RAM).

Don't forget to change the value of the "Own Model" parameter in the "Parameters" tab of the ClipAI input settings after installing the new AI!

Most AI is optimized to work in English. We recommend using:

For Russian-language articles:

1. YandexGPT (e.g., yandexgpt-5-lite) - A good neural network for short articles.
2. Phi (e.g., phi-4) - is suitable for many languages, including Russian.
3. Magnum (e.g., magnum-v4-12b) - pretty well suited for a variety of tasks.
4. Mistral (e.g., mistral-nemo-instruct) - is very good at writing even long articles.
5. Qwen (e.g., qwen2.5-7b-instruct-1m) - often can't write a long article, but is quite good at writing short ones, usually without making mistakes in HTML markup.

For articles in Chinese:

DeepSeek (e.g., deepseek-r1-distill-qwen-32b). Produces a process of "thinking" before writing an article, which although it will not be added to the final text, but significantly affects the improvement of its quality. Writes even very long articles. We would like to add it to the list of recommended for Russian, but this AI often embeds Chinese characters or English words into the text.

Сообщение Как использовать ClipAI совместно с локальными ИИ (LLM)? появились сначала на ClipAI.

1. All executions with one request - into one file.

In this case, written articles are saved in separate files, with a name equal to the title of each article. However, in case the article title or key is completely repeated twice, such articles will be written to one file.

Example:

2. Each request - to a separate file.

If this mode of operation is selected, each article (and even articles with matching titles) will be saved to a separate file. However, since there cannot be two files with the same name in one folder, the file name will be added to the will be added a random number.

Example:

3. Requests in one execution to one file.

In this preservation mode, all of the following are specified within the single execution article titles will be saved to the same file. The output file name will contain the date it was saved, as well as a random number.

Example:

4. Requests in one execution - to one file (with the name of the input file).

In this mode, all articles from single file in the input are saved to a single file in the output. Accordingly, if you specify several files with names at the input, there will be several files at the output. In this case, the name of the output file will correspond to the name of the input file.

Example:

Note that some of these modes also apply to automatic publishing (e.g., in the WordPress, Telegraph, or HTML file). For example, in the "Each request - to a separate file" mode, one article will be published for each written topic, and in the "Requests in one execution - to one file" mode, one article will be published at once with all the input topics or keys.

Сообщение Что означают разные режимы сохранения? появились сначала на ClipAI.

(only point 1 must be completed)

1. Go to the "Publish" tab of the input settings. Here you need to first select "Where to publish" - "Telegraph".
2. If necessary, enable "Generate and upload images with the article". In this case, below you need to select the source of images and their number. Also, in the case of Telegraph, you must configure service, to which you can upload images.
3. Enter "Name of the article author" and "Website". In the "Website" field, you can enter, for example, a link to your Telegram account. Or do not enter anything at all.

The output article links will appear in the folder you specified in the Output Data tab of the ClipAI input settings. The name of this file will contain the article author name you specified.

After publication, if you wish, you can also edit articlesThe instructions for editing articles also show how to log in to an existing Telegraph account.

Сообщение Как настроить автопубликацию в Telegra.ph при помощи ClipAI? появились сначала на ClipAI.

This will take about 2 minutes.. You only need to do these steps once, after which you can edit any of your entries. without the need for repetition the actions below, even if you closed the browser.

1. Right-click on the line with ClipAI - "Project Directory".

2. Go to the path "\bin\telegraph". Here you will find a text file. Open it and copy its contents.

3. Go to the page Google in the Chrome browser Telegraph. Then press F12 -> click on "Application" at the top - select "Cookies" on the left - "https://telegra.ph". Then be sure to reload the page without closing the window on the right. After that, it should look something like this:

4. If you already have a field named “tph_token” (not “tph_uuid”), simply replace its value with the one copied in step 2.
If it is not there, double-click under "tph_uuid" and enter "tph_token". Double-click in the "Value" column of the created row and paste the value copied in step 2. Then double-click in the "Domain" column and enter "edit.telegra.ph". It should look something like this:

5. Now you can go to the page you want to edit. The "EDIT" button will appear on the right. When you click on it, you will be able to edit the post.

If you need to log in to a previously created Telegraph account, you need:

1. Follow step 3 in the instructions above, then copy the value of "tph_token"
2. Publish at least one article in ClipAI, specifying in the "Publication" tab the data that matches your account
3. Follow steps 1 and 2 in the instructions above, replacing the contents of the file with the value “tph_token”.

All subsequent articles will be published under your account.

Сообщение Как изменить текст опубликованной ClipAI страницы в Telegraph? | Как войти в существующий аккаунт Telegraph? появились сначала на ClipAI.

Below, we will consider two ways to add images to an article: when automatically writing an article using ClipAI, and when creating an article manually directly on the Telegraph page.

Automatically (using ClipAI)

ClipAI uses ImgPhoto for automatic uploading and inserting images. This is a completely free service with a working API and no ads. Moreover, it allows you to get direct links to images, which is exactly what you need to work with Telegraph.

All you need to do to automatically publish images using it is to register, and then get an API key. The obtained key needs to be entered in the "Telegra.ph" section of the "Publication" tab of the input settings.

Manually (on the Telegraph website)

If you don't have ClipAI and want to insert an image on the Telegraph website, you can upload image to ImgFoto, then scroll down a bit and get any of the embedding codes:

Get the direct link from the embedding code here:

And insert the obtained link in the Telegraph article editing window by first clicking the button on the left .

Although ClipAI is not related to ImgFoto, we recommend supporting their service if you use it frequently. This way, it can remain free in the future.

Сообщение Как добавлять картинки в пост Telegraph? появились сначала на ClipAI.

• Changing the text style (for example, from "simple" to professional).
• Providing other contact information or links.
• Citation of authoritative sources for facts stated in the original text.
• Rewriting information to another product or item.
• Correction of factual errors in the text.
• …and any other goals you may need

ClipAI can do this fully automatically! To do this you need:

1. Specify the operating mode - "Rewriting".
2. In the "Processing" tab, select "Text style" - only "Custom style", and below in the "Custom text style" field, specify the necessary wishes for the article at the output. For example, "Write in a professional style. The text must contain facts related to the ClipAI program ( https://clipai.pro/ )".
3. It is also advisable to select “Rewrite” -> “Uniqueness” -> “Average”.

Please note: if you need to reduce (or on the contrary, increase) the number of characters/words in the text, you will need to different mode of operation.

Сообщение Как сделать рерайтинг текста, изменив что-либо в нём? появились сначала на ClipAI.

In this case, you can use several copies of the program, in each of which set topics for articles of a certain category. But sometimes it is more convenient to indicate a category next to the title of each article. It is for this purpose, along with the parameters ancor ­ site, you can use the “cat” parameter. To do this you need:

1. Enable the use of categories in the “Publishing” tab of the input settings.

2. Enter categories next to the topic names in the format:

Article title;cat=Category (heading) name

For example:

Which company created ChatGPT?;cat=Neural networks What is the best way to fill articles on a website?;cat=Programs

Сообщение Как выбрать отдельные категории (рубрики) для разных статей? появились сначала на ClipAI.

2. Then enable saving to HTML.

3. Once the article is generated, right-click on the resulting HTML file -> “Open with” -> “Microsoft Word” (or any other text editor of your choice).

Done! You can now save your document in .doc or .docx format (a standard Microsoft Word file) if needed.

Сообщение Как сохранить статью с картинками в документ Word (doc/docx)? появились сначала на ClipAI.

HTML files will now be saved in the same folder as txt files (specified in the Output Data tab). And if image generation is also enabled in the same "Publish" tabthen a separate folder with HTML file and images will be created for each article.

Сообщение Как сохранить статью с картинками в HTML-файл? появились сначала на ClipAI.

In this case, as an example, we will show the addition of the service GROQ. It is already added by default to ClipAI, so you do not need to repeat these steps specifically to use GROQ; if you need any other service, just repeat the steps below by analogy.

1. Find a OpenAI compatible URL in your neural network API documentation. For example, in GROQ it is located ­here:

2. Ibid. find the name of the model you need:

3. Create your API key and copy it. Specify it in the corresponding field of the "Parameters" tab of the input settings.

4. Now add all the copied parameters in the ClipAI input settings -> “Parameters” tab:

In this case, you need to specify the obtained "Model ID" in the "Custom Model" parameter and "base_url" in the "Custom API Endpoint" parameter.

And select the model “GPT (custom model)”:

Ready! Now you can use any neural network you need.

Сообщение Как добавить в ClipAI другую нейронную сеть? появились сначала на ClipAI.

1. Try enabling "Convert to WebP" in the "Processing" tab of the input settings.
2. Increase the “Timeout for waiting for a response to a request from AI” in the “Settings” tab.
3. Check whether access to your site is configured correctly in the “Publishing” tab.
4. Perhaps you do not have access to the neural network used to generate the image? If so, switch the image source used in the “Publish” tab.

Сообщение «Ошибка при генерации картинки, либо во время её публикации на ваш сервер. Продолжаем без картинок.» появились сначала на ClipAI.

	Average	High	Very High
Uniqueness of the text	~80-100%	Often 100%	Always 100%
Text quality
Operating speed
Saving HTML Markup
Translation of auto-generated Youtube subtitles into articles
Maximum number of characters in an article

For high and very high uniqueness of the article, ClipAI uses its own algorithms, and not a modified prompt.

Сообщение Какую степень уникализации использовать для рерайтинга? появились сначала на ClipAI.

Please note: almost all services are free to use.

	GPT (OpenAI)	Google Gemini	Together AI	Deepseek	OpenRouter, per account with a limit (60 requests per minute); there are completely free models that do not spend the balance (labeled "Free"), There are many completely free models (labeled "Free").	Mistral	Nvidia Cloud	GROQ
Quality (English)	It's great	It's great	Good	Good	Good	Good	Good	Good
Quality (Russian language)	It's great	It's great	Good	Average	Good	Average	Good	Good
Free to use	Appears after selecting ­here "Enabled for all projects."	Unlimited free use, capped (more than 60 requests per minute and 14'950 per day total for multiple models, including Gemma) per account; or free $300 per Google Cloud account, but virtually no limits.	Got it полностью бесплатные models that do not spend the balance (labeled "Free"), but are available only after entering the card data (without debiting).	—	Присутствует множество полностью бесплатных models (labeled "Free"). Up to 50 free requests per day per account immediately after registration, or up to 1000 requests per day - if the account has ever been funded by $10.	Provided free 1 million tokens (~2500 articles) per month per account.	Provided free of charge up to 40 requests per minute to the account. The validity period of the API key is about 6 months.	Provided free of charge from 250 to 14400 requests per day on each of the model offered by the service.
Regions of operation (IP)	Except RF/RB	Except RF/RB. IP addresses are supported more than 210 countries. EU IPs may sometimes not be supported.

• The table shows the characteristics (quality, cost) of the highest quality model if the service provides several models.
• The "Quality" rows in the table reflect the subjective opinion of the ClipAI team, based in part on user opinion.
• “RF” - Russia, “RB” - Belarus, “EU” - European Union.
• The "Work regions" line reflects from which IP addresses of which countries the request for article generation can be sent. Additional restrictions may also be imposed on the part of the service used, for example, in the usage rules.

This article contains information relevant to 07.10.2025. We update it as necessary (if any changes occur in the world of AI). Most likely, everything described above is still relevant today. At the same time ClipAI updated constantly.

Сообщение Какой ИИ выбрать для написания статей? появились сначала на ClipAI.

To do this you need:

1. Enable “Rewriting” mode.
2. At the input, specify the article that needs to be rewritten with automatic error correction.
3. In the “Processing” tab, select “Rewrite” -> “Uniqueness” -> “Average”. Automatic error correction does not work with higher uniqueness due to the nature of the AI.
4. Just below, select “Correct errors in text” -> “Enabled”.

Сообщение Как автоматически исправить ошибки в тексте? | Как перевести автоматически созданные субтитры в статью? появились сначала на ClipAI.

But if you want to limit which sources information will be used - this can be done in the “Processing” -> “Additional” tab. information to search." Here you can specify the information that will be added to the request. For example, you have the following article topics:

Sports news for 2024 
What is the current judicial practice under the consumer protection law?

But let’s say you need articles relevant to Kazakhstan. To do this, you only need to add in “Additional information for search”, for example:

In Kazakhstan

Then you will get the following queries:

Sports news for 2024 in Kazakhstan 
What is the current judicial practice under the consumer protection law in Kazakhstan?

Сообщение Как правильно настроить ClipAI Plus? появились сначала на ClipAI.

1. Adding your sections to the plan generated by AI.

To do this, you need to select the “Writing an article (with sections, for large articles)” operating mode. Then, in the “Processing” tab - “Add your elements to the article outline,” write in each line the element you want to add. For example:

FAQ (question-answer)
Table

In this case, the blocks you specified will appear in the articles written by the AI:

2. Use your entire article plan.

You can completely specify your plan, which includes the blocks and sections you need. How to do this is indicated on this page.

Сообщение Как добавить свои разделы в статью (например, «FAQ» или таблицу) появились сначала на ClipAI.

Let’s look at the settings that are located in the “Advanced Settings” section. We recommend changing them only if you know exactly what you are doing.

“Timeout waiting for a response to a request from AI (sec)”. The maximum time to wait for a response to each request. A larger value will reduce the number of errors when there is no response from the server or an empty response is received. At the same time, sometimes this can cause text to take longer to generate. Default is 360 sec.

"Repetition rate". A lower value may cause various problems in the article (random character set, transitions to other languages, and so on). However, sometimes this helps reduce the Spam parameter and expand the AI's vocabulary. Default is 5 points.

"Variety of text". A lower value can reduce the uniqueness of the text and make it “dry”, as well as increase the number of logical repetitions. However, AI will also become more likely to use those facts in which it is confident. Default - 5 points; and for some AIs - 3 points.

"Custom API Endpoint". Link to connect to an alternative API compatible with the GPT API when working with AI. Needed, for example, if you are using local AI, like GPT4All. Or use a general (for example, corporate) Reverse Proxy. The default value is https://api.openai.com/v1/chat/completions.

Сообщение Расширенные параметры появились сначала на ClipAI.

1. Install a file with access to WordPress sites in the “Publishing” tab:

Then each article will be sent to one of the sites specified in the file, one by one.

2. Do the same as in step 1, but also use the “;site=” parameter in the input file to indicate the specific site to which the article will be loaded. For example:

Buy kitchen tables;site=https://site-1.com/
Tabbouleh salad recipe;site=https://site-2.com/

By the way, you can also use other options.

3. Take advantage copies of ClipAI with different settings.

Сообщение Как публиковать разные статьи на разные сайты? появились сначала на ClipAI.

• At the discretion of the AI
• Creative
• First person
• Professional
• Humorous
• Mentoring
• Emoji
• Ironic
• Jocular
• Reasoned
• Admired
• Critical
• Enthusiastic
• Emotional
• Neutral
• Interrogative
• Advisory
• Your own style

There are only two nuances in this parameter:

1. If you select several styles at the same time, one random one from your selection will be used before writing each article.
2. When choosing "Your own style“You must enter the style you need in the input field below, “Custom text style.” And vice versa: when entering information in this field, do not forget to turn on “Text Style” - “Custom Style”.

In “Custom Style” you need to write instructions that the AI must additionally carry out. For example, “Be sure to write the article from the perspective of someone who is well versed in the topic.”.

Сообщение Стиль текста появились сначала на ClipAI.

1. WordPress version no less than 5.6
2. The site protocol is https, not http. Even free certificates like LetsEncrypt are suitable. Usually installed with one click in the admin panel of your hosting.

Even if your site does not meet the above requirements, you can install basic-auth plugin to your site: after this, you can log in without the steps below, and you need to enter your WordPress account password as the password. But you shouldn’t do this without a reason: in any case, the lack of HTTPS will significantly lower your site in search results, and an old version of WordPress can add additional problems, including security-related ones.

Publishing in WordPress is configured in the “Publishing” tab of the settings:

We do everything as specified in the input settings. 

Website address - your website in the format:

protocol://domain.com/

Example:

https://google.com/

Exactly like that, with a protocol and a slash “/” at the end.

Login - your login from the administrator account on your site, with which you log into the admin panel. Sometimes this may be by email.

The password is GPT the password for the admin panel, and the application password. How to recognize him?

We go to the WordPress admin panel: usually it is located at the link https://your-site.com/wp-admin/. Select “Users” -> “Profile” on the left:

Scroll down a little further to this form:

We enter any application name (for example, “ClipAI”); there is no need to remember it: it will not be needed during setup. Click on the “Add a new application password” button. A form similar to this will appear:

This is the application password, which must be entered in the “Password” field.. You must enter exactly as indicated here: with spaces and case sensitive.

Сообщение Как настроить автоматическую публикацию на сайт с CMS WordPress? появились сначала на ClipAI.

In order to take advantage of this opportunity, you only need to add the appropriate parameters directly to the title of the articles. For example, you have the following lines (titles of articles) in the input file:

Which company created ChatGPT?
What's the best way to fill articles on a website?

You just need to add parameters ancor and ancorURL:

Which company created ChatGPT?;ancor=OpenAI;ancorURL=https://openai.com/
What's the best way to fill articles on a website?;ancor=ClipAI;ancorURL=https://clipai.pro/

After this, ClipAI will automatically make several changes:

• Content ancor will be added to all requests to AI within the current article, as keyword, which must be used.
• Every time you meet ancor in the article, the “a href” parameter will add a link to the site located in ancorURL;
• If within the article it is never found ancor (which is extremely rare), it will be embedded at the end of a random non-blank paragraph.

There are also other parameters that can be entered directly in the input file: for example, site ­ cat. You will find detailed information about them in the input settings - the “Input Data” tab, right under the large input field.

Сообщение Как автоматически прикрепить ссылки к определённым анкорам в статье? (Перелинковка) появились сначала на ClipAI.